Second Hand US STOCK Capo 4WD 1/8 RC Racing Car R34 4x4 High Speed Metal RTR Drift Cars Sound Smoking

Item Condition: #Attention Please!
1. This item was returned by a customer due to a mistaken purchase. As a result, the packaging may show signs of wear, such as creases, scratches, or the product not being properly placed back in its original packaging, as it has already been opened.

2. The product may have visible cosmetic imperfections, including fingerprints, dust, or other minor surface blemishes.

3. The functionality of the product is currently untested, so any potential faults would need to be identified by the customer. If you encounter any issues, please feel free to contact me, and I will provide free or low-cost replacement parts as needed.
This is a second hand item. After you get it, if there's any problem, please contact with us immediately and provide pictures and videos. We will offer you free technical assistance, replacements and solutions. Please rest assured.
#Note: The product may have been opened or used. Image for reference only.

#Capo 4WD 1/8 RC Racing Car R34 4x4 High Speed Metal RTR Drift Cars Sound Smoking

#Note: Smoking oil cannot be sent by international express. You need to buy smoke oil (ethylene glycol) locally. 

#Specification:
Manufacturer: Capo
Material: Metal, Plastic, Rubber
Color: Light Blue, Purple
ID: CP-CD15829-GT-R34-UP1-RTR-PAINTING-LBUPL

#This Package Includes:
1/8 R34 RC Car Model
2-Speed Transmission
Motor: HOBBYWING EZRUN Brushless 3652SD G3 3300KV
ESC: HOBBYWING EZRUN Brushless MAX10 G2 80A
Servo：1x 35KG metal servo, 2 x 9g metal servos
Light System
Sound System
Smoke Unit
RadioMaster MT12 Remote Controller and Receiver
Battery
Charger

#Vehicle Features:
1. The car shell is made of magnesium alloy with ultra-lightweight (the material is the same as the UAV frame);
2. All CNC parts and die-casting appearance parts;
3. The independent front and rear bumpers are made of plastic, which same as the real car;
4. The differential gear uses powder metallurgy MIM technology, with an accuracy of ±0.02 and hardness of 47-52HRC;
5. The vehicle is equipped with rubber tires, and drift hard tires are optional;
6. Truly restore the function of the pin-type valve and the same stepless damping adjustment as the real vehicle;
7. All-metal gearbox. The gearbox gear is made of carbon steel and hardened by quenching;
8. The axle is equipped with a differential function. The differential gear is made of powder metallurgy material with heat treatment, and uses metal injection molding technology;
9. The steering component restores the design of the real car, using rack and gear;
10. The shock absorber is a needle valve shock absorber, and the damping rebound coefficient of the shock absorber can be manually adjusted through the valve on the tower top;
11. The vehicle is equipped with a brake disc, and the side of the brake disc is equipped with a vent;
12. The door and hood can be opened.

#About the Motor HOBBYWING EZRUN Brushless 3652SD G3 3300KV:
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensored
Pole Count: 4
KV Rating: 3300KV
LiPo Cells: 2-3S
No-load Current(A): ≤3.9A
O.D.(mm): 37
Length (mm): 53
Shaft Diameter (mm): 3.175(0.125in)
Weight (g): 228g
Front Bearing: D13*D5*T4
Rear Bearing: D11*D5*T5

#About the ESC HOBBYWING EZRUN Brushless MAX10 G2 80A:
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensored
Waterproof: Waterproof
Cont./Peak Current: 80A/520A
Input Voltage: 2-3S Lipo
BEC Output: 6/7.4V,5A
Input Wires: Red-12AWG-150mm*1 Black-12AWG-150mm*1
Input Connectors: XT60
Output Connectors: 4.0mm Gold (female)
SET Button on ESC: No
LED Program Box: Supported
LCD Program Box: Supporte(G2)
OTA Programmer: Supported
Program Port: Separate
Fan Size: 25x25x10mm
Fan Voltage Range: 5-7.4V
Fan Powered by: Powered by BEC
Firmware Upgrade: Supported
ESC Size: 53mm*39.5mm*37.2mm
ESC Weight: 120g(w/Wires)

#If you have any questions or are not sure whether it is the correct item you want, pls feel free to contact me before purchasing.

ID:RLAX024687