1/14 Metal CNC Heavy 4Axle Steering Trailer 999 W/ Servos Motor ESC Sound For TAMIYAA MAN Scainia Benzs Remote Control Tractor TruckDG-999-R-DZN1
Specification: Item Condition: New, Assembled and Painted.
Material: Aluminum Alloy, Plastic, Rubber
Battery: 2S 7.4V Lipo Battery(Not Included)
Suitable For: 1/14 TAMIYA RC Tractor Truck, DIY Models
The Package Includes:
1/14 RC Trailer Model
Integrated Circuit Board
The package doesn't include:
RC Controller & Receiver
1. The whole length of the trailer is 1280mm, the horizontal height is 170mm, the horizontal clearance from the ground is 13mm, and the middle width is adjusted by 197-235mm;
2. The weight of the trailer is 7kg, and the load limit weight is 30kg;
3. It is recommended to use 2s (7.4v) 3000 MAH lithium battery;
4. The wheels of the trailer can rotate with the direction of the tractor;
5. Here is a metal rod controlled by a brush motor to split this trailer and your tractor by remote control;
6. The trailer has 6 servos. One of them is use to change the width of middle plate; one is use to control the front support of trailer¡ê?the other four servos are use to control the four axles to steering.
1. It is suggested that the electric adjustment of screw motor should not raise and lower the full throttle.Due to the electric adjustment developed by ourselves, the heat dissipation and current should be reserved.When the full throttle is turned on, it is easy to lose the signal and restart the electric adjustment.
2. In the process of driving, it is necessary to pay attention to the retraction and placement of the front jack up steering gear to prevent the steering gear mechanism from standing against the rear girder of the truck, resulting in the burning of the servo steering gear.
3. In the process of driving, when there is a transportation load in the middle, it is strictly prohibited to adjust the width. Otherwise, the width adjustment fails and the width adjustment servo motor burns down.
4. There are Brake lamp, clearance lamp, license lamp, reversing lamp, left turn signal lamp, right turn signal lamp;The light transmission is Bluetooth transmission. Pay attention to the signal interference. If the red lights of the transmitter and the receiver are flashing, it means that the signal is lost without matching.
Each socket at the transmitting end is divided into positive and negative poles, which are connected to light wire corresponding to the headlamp group.
5. The light system includes the transmitter and the receiver. The receiver and lights have been installed on the Trailer. The transmitter needs to be wired by yourself.
If you have any query or are not sure whether it is correct item that you want, pls feel free to ask me before purchase.
We Also Recommend
Kabolite K988 100S HUINA 1/14 Hydraulic RC Loader Radio Control Truck Sound Light Servo Motor Battery Charger Coupler Bucket PL18Lite
HUINA 1/14 Liebhe K970 100S 970 Kabolite Excavator Ready-To-Run RTR Hydraulic RC Digger PL18EVLite Radio Light Sound GPS Air Filter Warning Light
LESU Aoue ET26L 1/14 Metal Three-section Hydraulic RC Radio Controlled Excavator Painted Construction Car W/ Motor Servo ESC GPS
JDMODEL 1.5M/59 Inches Metal Drake Trailer Variable Width for 1/14 TAMIIYA MAN Benzs Scainia Tractor Truck Work With 1/12 Trucks